TM9-2330-374-14&P
Installation.
b.
(1) Install two wires (7, figure 4-12) to switch (4).
(2) Install switch (4) in wall box (5). Secure with two screws (6).
(3) Install switch face plate (2). Secure with two screws (1).
24 VOLT VENTILATING FAN
INITIAL SETUP
Tools
General mechanics tool kit
Materials/Parts
24 volt ventilating fan
WARNING
D i s c o n n e c t all outside power before performing any
maintenance on the electrical system. Failure to do so
could result in serious injury or death.
Removal.
a.
Do not pull on wires, only pull connectors apart.
P u l l i n g on wires could damage them.
(1) Pull connectors (1, figure 4-13) apart.
(2) Remove four screws (2) securing fan (3) to duct (4).
(3) Remove ground wire (5) from fan (3).
R e m o v e two screws (6) securing
mounting bracket (7) to ceiling.
(4) Lift off mounting bracket (7) and fan (3) as a unit.
(5) Remove two hex nuts (8) securing mounting bracket (7) to fan (3). Separate
mounting bracket (7) and fan (3).
