TM9-2330-374-14&P
Installation.
b.
(1) Connect positive wire (6, figure 4-9).
S e c u r e ground wire with screw
(2) Position light assembly (5) on shim (4).
Secure light assembly with three remaining screws (3).
(3).
Swing door (2) up and secure with captive screw
(3) Install dome light lamp.
(1).
INITIAL SETUP
Tools
General mechanics tool kit
Materials/Parts
1 1 0 volt dome light lamp
WARNING
Disconnect all outside power before performing any
maintenance on the electrical system. Failure to do so
could result in serious injury or death.
Removal.
a.
(1) Loosen captive screw (1, figure 4-10) securing door (2). Swing door (2)
down .
Remove four screws (4) securing light
( 2 ) Remove lamp (3) to prevent damage.
assembly (5) to ceiling.
(3) Remove light assembly (5) and shim (7) from ceiling. Disconnect wire (6).
