TM 9-2330-376-14&P
4 - 2 2 . COMPOSITE LIGHT MAINTENANCE (Con't).
Remove four lamps (3) by pushing lamps in and turning counterclockwise.
3.
Install four lamps (3) by pushing lamps in and turning clockwise.
4.
If removed, install new preformed packing (2).
5.
Install lens (5) on body (4) and tighten six captive screws (1).
6.
REMOVAL
b.
NOTE
l Tag wires for installation if marker bands are missing or illegible.
l Only XM1073 has a mounting bracket.
1.
Remove four composite light connectors (1o) from mounting bracket (12), if present. Disconnect composite
light connectors from wiring harness connectors (11).
2.
Remove two screws (9), lockwashers (8), and composite light (6) from bracket (7). Discard Iockwashers.
INSTALLATION
c.
Install composite light (6) on bracket (7) with two screws (9) and new Iockwashers (8).
1.
NOTE
Only XM1073 has a mounting bracket.
Connect four composite light connectors (10) to wiring harness connectors (11). Install in mounting bracket (1 2),
2.
if present.
FOLLOW-ON TASKS:
Connect intervehicular cable assembly to towing vehicle (para 2-10).
Check operation of light.
TA700930
4-19
