TM 9-2330-378-14&P
4 - 2 4 . INTERVEHICULAR CABLE ASSEMBLY REPAIR.
This Task Covers:
Terminal Assembly Replacement
Contact and Connector Plug Replacement
Marker Band Replacement
Lug Terminal Replacement
Initial Setup:
Materiais/Parts:
Equipment Conditions:
l Intervehicular cable assembly removed (para 4-23).
Solder (Item 13, Appendix E)
Marker tags (Item 16, Appendix E)
Tools/Test Equipment
One lug terminal
General mechanic's tool kit
Eight contacts
Electric etcher
Marker bands (as required)
Soldering iron
Terminal assemblies (as required)
References:
TB SIG 222
a. CONTACT AND CONNECTOR PLUG REPLACEMENT
NOTE
For detailed instructions on resoldering and soldering, refer to TB SIG 222.
1.
Loosen clamp (4) on shell (3). Slide shell back from insert (1).
Drive contacts (2) from insert (1).
2.
Tag wires. Desolder eight contacts (2) from cable (7) and remove. Discard contacts.
3.
4.
Remove shell (3) and bushing (5) from cable (7).
Remove spring (6) from cable (7).
5.
4-22
