TM 9-2330-376-14&P
4 - 2 3 . INTERVEHICULAR CABLE ASSEMBLY REPLACEMENT (Con't).
Remove nut (10), screw (12), Iockwasher (1 3), and clamp (11) from intervehicular cable assembly (7). Discard
5.
Iockwasher.
NOTE
Tag wires for installation if marker bands are missing or illegible.
Remove six connectors (1) from two clips (2). Disconnect connectors.
6.
7.
Remove screw (4), Iockwasher (3), and ground lead (5) from clip (2). Discard Iockwasher.
If clips (2) are damaged, remove three remaining screws (4), Iockwashers (3), and two clips from frame. Discard
8.
clips and Iockwashers.
Remove intervehicular cable assembly (7) from trailer.
9.
b. INSTALLATION
1.
Slide clamp (11 ) onto intervehicular cable assembly (7'). Secure clamp with screw (12), new Iockwasher (13),
and nut (10).
NOTE
XM1073 has only one clamp.
2.
Slide two clamps (6) onto intervehicular cable assembly (7). Position intervehicular cable assembly on frame.
If removed, install two new clips (2) with three screws (4) and new Iockwashers (3).
3.
4.
Install ground lead (5) on clip (2) with remaining screw (4) and new Iockwasher (3).
5.
Connect six connectors (1) and install in two clips (2).
6.
Secure two clamps (6) to frame with screws (9) and new Iockwashers (8).
7.
Hook spring (14) to clamp (11) and frame.
If removed, install new clip (16) on curbside handbrake mud guard with screw (18) and new Iockwasher (17).
8.
Stow connector (15) in clip (16).
9.
FOLLOW-ON TASKS:
Connect intervehicular cable assembly to towing vehicle (para 2-10).
Check operation of lights.
4-21
