TM 9-2330-376-14&P
4-28. HANDBRAKE MAINTENANCE (Con't).
12.
Unhook handbrake cable (27) from lever (29) and
remove through rear of backing plate (30).
NOTE
The following procedure applies to both
left-hand and right-hand handbrakes. XM979,
XM1061, and M1061A1 have one handbrake
lever and cable on each side of trailer. XM1073
has one handbrake lever and two cables on
each side.
Feed handbrake cable (27) through rear of
1.
backing plate (30) and hook on, lever (29).
2.
Secure other end of handbrake cable (27) with bracket (23), two bolts (22), new Iockwashers (25), and nuts (26).
Install hub and brakedrum (para 4-44). Install tire and wheel (para 4-43).
3.
4.
Loosely install two jamnuts (28) and turnbuckle (21) on end of handbrake cable (27).
Loosely install jamnut (20) on end of rod (19). install rod on turnbuckle (21).
5.
6.
Loosely install jamnut (18) and clevis (2) on end of rod (19).
TA700939
4-33
