TM 9-2330-376-14&P
4 - 2 9 . SERVICE BRAKE MAINTENANCE.
a.
Disassembly
Assembly
c.
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materiais/Parts:
Rags (Item 12, Appendix E)
Hub and brakedrum removed (para 4-44).
Dry cleaning solvent (Item 14, Appendix E)
Tools/Test Equipment:
Thirty Iockwashers
General mechanic's tool kit
Drain pan
Floor jack
Jackstand
a.
DISASSEMBLY
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area has
been properly cleaned. There may be asbestos dust on these components which can
be dangerous if you touch it or breathe it. Wear an approved filter mask and gloves.
Never use compressed air or a dry brush to clean brake components. Dust may be
removed using an industrial-type vacuum cleaner. Clean dust or mud away from brake
components with water and a wet, soft brush or cloth. Failure to follow this warning may
result in serious illness or death to personnel.
1.
Release handbrake lever.
2.
Disconnect handbrake cable (2) from lever (1).
TA700943
4-37
