TM 9-2330-381-14
o. Install beacon warning light to rear edge of streetside deflector and connect to electrical harness at outboard
streetside clearance light as follows:
(1) At streetside deflector (21), remove two nuts (22), lockwashers (23), and bolts (24). Discard lockwashers.
(2) Install beacon warning light mounting bracket (25) on rear edge of deflector with triangular plate outboard and
secure with two bolts (24), lockwashers (23), and nuts (22).
(3) Install beacon warning light (26) and gasket (27) onto mounting bracket (25) ensuring electrical leads (28) are
between beacon warning light (26) and gasket (27) and pointed toward rear of trailer. Secure beacon warning
light (26) with three bolts (29) and locknuts (30) provided. Tighten locknuts (30) until approximately 1-1/2
threads protrude beyond locknut (30). Discard lockwashers provided with light.
(4) Connect beacon warning light electrical leads (28) to cable on bracket (25) and secure cable to bracket with
cable tie.
Change 1 4-4.1
