TM 9-2330-381-14
4-41. SUSPENSION CYLINDER (CONT)
23.
Using external retaining ring pliers, remove two retaining rings (36) from lower pin (37). Remove lubrication fitting
(38) from lower pin (37).
CAUTION
Do not use excessive force when attempting to remove lower pin or damage to
equipment may result. If lower pin cannot be removed after several attempts,
notify DS maintenance.
24.
Using sledge hammer and removal tool, use moderate driving force and drive lower pin (37) out of lower
suspension arm (2) and suspension cylinder (6). If lower pin cannot be removed after several attempts, request
DS maintenance perform procedures in paragraph 5-14 to remove pin.
4-180 Change 3
