TM 9-2330-381-14
NOTE
Perform this procedure, or any portion of this procedure, as required, to complete
the necessary repair.
Nonmetallic hoses are all manufactured items and are addressed in appendix F.
The following procedures call out removal/installation of associated pneumatic
fittings only.
REMOVAL
1.
Tag and disconnect three nonmetallic hoses (1, 2, and 3) on gooseneck (para. 4-23). Install caps/plugs into all
openings.
2.
Remove five locknuts (4) and clamp loops (5). Discard locknuts.
3.
Remove three nonmetallic hoses (1, 2, and 3) from gooseneck.
4.
Remove two dummy couplings (6) from quick-disconnect couplings (7).
4-213
