TM 9-2330-381-14
5.
Install caps and plugs into openings in manufactured hose until ready for installation.
6.
Repeat steps 3 thru 5 to install new fittings onto other end of nonmetallic hose (1).
INSTALLATION
1.
Remove nuts on two straight adapters (8) and aline and install two straight adapters (8) onto gooseneck.
Reinstall nuts onto adapters.
2.
Apply pipe sealant to both ends of two straight adapters (8). Aline and install two quick-disconnect couplings (7)
and secure chain from two dummy couplings (6) onto two straight adapters (8).
3.
Apply petroleum jelly to two preformed packings (9) and install two preformed packings (9) onto two quick-
disconnect couplings (7).
4.
Install three nonmetallic hoses (1, 2, and 3) onto gooseneck.
4-215
