TM 9-2330-381-14
5.
Using a 15/16-inch deepwell socket, remove two nuts (11) and washers (12) from brake chamber assembly (13).
6.
Remove cotter pin (14), two flat washers (15), and headless pin (16) from rod end clevis (17). Discard cotter pin.
7.
Remove two nonmetallic channel (18) and hose clamps (19). Tag and disconnect two nonmetallic hoses (20 and
21) from elbow fittings (22 and 23). Install caps/plugs into openings.
8.
Remove two elbow fittings (22 and 23) from brake chamber assembly (13). Install caps/plugs into openings.
9.
Remove brake chamber assembly (13) from axle. Remove screw (24) and seal plug (25) from brake chamber
assembly (13).
10.
Count and record number of turns to remove rod end clevis (17). Unscrew and remove rod end clevis (17) and
nut (26) from brake chamber assembly (13).
4-219