TM 9-2330-381-14
4-54.
PLATFORM STEERING CYLINDER (CONT)
2.
Perform manual steering (para. 2-21) to move steering plate #5 (12) until both dimensions are the same; then, go
to step 3.
3.
Compare dimension "A" with "shim" chart and determine quantity of spacer plates (29) required for each cylinder.
4.
Loosen nuts (25) sufficiently to move stop blocks (28) off of cylinders and insert required number of spacer plates
(29).
5.
Install stop blocks (28) on each cylinder (1) and secure stop blocks on cylinders with capscrews (27), lockwashers
(26), and nuts (25).
FOLLOW-ON MAINTENANCE
1.
Install longitudinal strut (para. 4-53).
2.
Perform required lubrication (para. 3-3).
3.
Perform hydraulic system bleeding to remove air from hydraulic steering system (para. 4-19).
4.
Perform platform steering alignment (para. 4-16).
4-55.
GOOSENECK STEERING CYLINDER
This task covers:
a. Removal
b. Inspection
c.
Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Suspension mandrel, item 6, appx. B
Davit, item 1, appx. C
Lifting strap, 1000 lb (454 kg) capacity minimum
The following tools can be found in common tool kit no. 2, item 18, appx. B:
Torque wrench 1/2" drive,
Degreaser tank, 20 gal
0-200 lb-ft
Crowbar
Drain pan, 4 gl
Goggles, industrial
Extension light, 24 ft
Gloves, chemical and oil protective
4-274
