TM 9-2330-381-14
3.
To install service cover (6 or 7), position specific cover in appropriate platform opening and slide each retainer (2)
aft and outboard until latch secures under edge of platform weldment. Tighten each capscrew (1). Install
capscrew (6.1), lockwasher (6.2), and washer (6.3) to secure cover in place. Repeat this procedure for each
access cover installed.
4.
To install service cover (3, 4, or 5), position specific cover in appropriate platform opening and slide two retainers
(2) outboard until latch secures under edge of platform weldment. Tighten each capscrew (1) to secure cover in
place. Repeat this procedure for each access cover installed.
Change 2 4-291
