TM 9-2330-381-14
6.
Using two people, remove spring and guide rod assembly (11) from ramp by lifting forked end of guide rod (8) off
of ramp lift lever (4) and lowering spring and rod assembly (11) until top of guide rod (8) is free of weldment
bracket (13).
7.
Remove spring guide rod (8) from helical compression spring (12).
8.
Remove nut (14), capscrew (15), and adjustment fitting (16) from rod (8).
9.
Remove two capscrews (17), lockwashers (18), and plate (19) from platform lug weldment (20).
Discard
10.
Install lifting chain (21) through opening at top of ramp weldment (22) and attach lifting chain to a suitable
overhead lifting device (23).
11.
Operate lifting device (23) to take up slack in lifting chain (21).
12.
Open snap (1) and load binder (1.1) of chain assembly (2) and remove chain hook from hole (3) in platform.
Open quick-link (24) and remove chain assembly (2) from attachment lug on side of ramp. Lay chain assembly
(2) on platform.
Change 3 4-295