TM 9-2330-381-14
4-60.
LOADING RAMP (CONT)
NOTE
Ramp is lowered toward horizontal position to permit installation of the capscrew
and washer installed on top end of the spring guide rod.
13.
Unhook chain assembly (2) from platform and reconnect hook to hole in ramp lift lever (4). Make sure guide rod
is alined in ramp weldment bracket and lower ramp until spring supports weight of ramp.
14.
Install washer (7) over end of guide rod (8) protruding through top of bracket (13). Install capscrew (6) through
hole in guide rod (8) and secure capscrew (6) with locknut (5).
15.
Return ramp to raised (stow) position (para. 2-20). If chain sags with load binder closed, open load binder,
remove quick-link, and shorten chain until there is no sag.
4-300 Change 3
