TM 9-2330-381-14
Materials/Parts
Crocus cloth, item 6, appx. E
Wiping rag, item 19, appx. E
Cleaning compound solvent, item 25, appx. E
Cotter pin Lockwasher (4)
Cotter pin
Cotter pin
Locknut (4)
Personnel Required: 2
Equipment Condition
Platform adjusted to 51 inch (130 cm) height (para. 2-19)
If semitrailer is uncoupled, couple, or support gooseneck (para. 2-24)
NOTE
The following procedure is to be used for either curbside or streetside front
support legs. Repeat this procedure as required to complete the necessary
repairs.
DISASSEMBLY
NOTE
When removing latch pin out of support tube, it may be necessary to rotate
handcrank slightly in either direction to relieve pressure so that pin may be
extracted.
1.
Unfasten linch pin (1), rotate latch pin (2), and pull latch pin out of support tube (3).
1.1
If required, remove nut (3.1), washer (3.2), and handle (3.3) from pin (3.4).
Change 2 4-311
