TM 9-2330-381-14
DISASSEMBLY
1.
Remove linch pin (1) from keeper pin assembly (2) and pull keeper pin from upper block side (3).
2.
Unfasten quick-disconnect links (4) and remove keeper pin assembly (2).
3.
Remove cotter pin (5) and extract headed pin (6) from lower block side (7).
4.
Remove swivel and eye assembly (8) from lower block side (7).
5.
Secure lower block side (7) in a machinist's vise with vise jaw caps.
6.
Using hammer, rotate upper block side (3) counterclockwise to loosen and remove captive nut (9) and upper block
side (3) from pulley pin (10).
7.
Remove thrust washer (11) and pulley (12).
8.
Rotate lower block side (7) and secure pulley pin (10) in vise.
9.
Using hammer, rotate lower block side (7) counterclockwise to loosen and remove capture nut (13).
4-335