TM 9-2330-381-14
4-72. CABLE GUIDE
This task covers:
a. Removal
c. Inspection
e. Installation
b. Disassembly
d. Assembly
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Degreaser tank, 20 gl, item 17, appx. B
Gloves, chemical and oil protective, item 17, appx. B
Goggles, industrial, item 17, appx. B
Materials/Parts
Cleaning compound solvent, item 25, appx. E
Lockwasher (8)
Locknut (2)
Personnel Required: 2
Equipment Condition
General Safety Instructions
WARNING
When on top of gooseneck and removing or installing cable guides, always hold
onto guardrails with one hand to avoid falling or injury to personnel may result.
REMOVAL
NOTE
The following procedure is to be used for either streetside or curbside cable
guides. Repeat this procedure as required to complete the necessary repairs.
1.
Remove two lubrication fittings (1 and 1.1) from roller shaft (2).
2.
Remove a lubrication fitting (1) from top of each roller shaft (3 and 4).
3.
Remove capscrew (5) and locknut (6) securing roller shaft (2) to gooseneck weldment bracket (7). Discard locknut.
4-338 Change 1