TM 9-2330-381-14
4-72. CABLE GUIDE (CONT)
2.
Install roller assembly (14) onto roller shaft (3) and install clamp plate (13), two lockwashers (10), and capscrews (9)
onto roller shaft (3).
3.
Position roller assembly (8) in gooseneck weldment bracket (7) and install roller shaft (2). Secure roller shaft (2) to
bracket (7) with capscrew (5) and locknut (6).
4.
Install grease fittings (1 and 1.1) on all three roller shafts (3, 4, and 2).
FOLLOW-ON MAINTENANCE
Lubricate cable guides (para. 3-3).
4-73. CABLE GUIDE (USMC)
This task covers:
a. Removal
c. Inspection
e. Installation
b. Disassembly
d. Assembly
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Degreaser tank, 20 gl, item 17, appx. B
Gloves, chemical and oil protective, item 17, appx. B
Goggles, industrial, item 17, appx. B
Lifting strap, item 31, appx. B
Materials/Parts
Crocus cloth, item 6, appx. E
Grease, item 12, appx. E
Cleaning compound solvent, item 25, appx. E
Locknut (4)
Locknut (2)
Personnel Required:
2
Equipment Condition
Platform lowered to lowest position (para. 2-19)
Gooseneck component assembly removed (para. 4-22)
4-342 Change 1
