TM 9-2330-381-14
4-99.
CYLINDER HEAD COVER (CONT)
REMOVAL
1.
Remove sleeve nut (1), washer (2), and gasket (3). Discard gasket.
2.
Remove cylinder head cover (4) and gasket (5) from cylinder head (6). Discard gasket.
3.
Remove two bolts (7), decompression hole cover (8), and gasket (9). Discard gasket.
INSTALLATION
1.
Install gasket (5) and cylinder head cover (4) on cylinder head (6).
2.
Install gasket (3), washer (2), and sleeve nut (1). Torque sleeve nut (1) to 86 - 96 in-lb (9.8 - 10.8 Nm).
3.
Install gasket (9), decompression hole cover (8), and two bolts (7).
4-484
