TM 9-2330-381-14
4-102. NOZZLE HOLDER ASSEMBLY
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Gloves, chemical and oil protective, item 18, appx. B
Goggles, industrial, item 18, appx. B
Materials/Parts
Lockwasher
Gasket
Equipment Condition
General Safety Instructions
WARNING
Diesel fuel is combustible and is an irritant to the eyes, skin, and respiratory
system. To avoid injury to personnel and explosion, extinguish all smoking
materials and do not allow sparks or open flame near the fuel tank or the fuel
system. Use skin and eye protection and work in a well-ventilated area.
Clean up any fuel that is spilled during fuel line/tank removal or injury to personnel
may result.
CAUTION
All fittings and openings must be capped or plugged immediately after opening to
prevent dirt, moisture, or other foreign material from entering the fuel system or
damage to equipment may result.
REMOVAL
1.
Loosen two hose clamps (1), straighten hose clamp (2), and remove hose (3). Collect excess fuel in hose into
drain pan and cap/plug hose.
2.
Remove nut (4) and lockwasher (5) from shouldered stud (6), unscrew two nuts (7), and remove metallic tube (8).
Collect excess fuel in hose into drain pan and cap/plug tube. Discard lockwasher.
4-488