TM 9-2330-381-14
REMOVAL
Remove oil pressure transducer (1), electrical connector retainer (2), and gasket (3) from crankcase (4). Discard gasket.
INSTALLATION
1.
Install gasket (3) and electrical connector retainer (2) into crankcase (4). Torque electrical connector retainer (2)
to 129 - 174 in-lb (14.6 - 19.7 Nm).
2.
Install oil pressure transducer (1) onto electrical connector retainer (2) and torque to 60 - 86 in-lb (6.7 - 9.8 Nm).
4-487
