TM 9-2330-381-14
3.
Remove fuel injector holder (9) and gasket (10). Discard gasket.
4.
Remove screw (11) and loop clamp (12) from metallic tube (8).
INSTALLATION
1.
Install loop clamp (12) and screw (11) to metallic tube (8).
2.
Install gasket (10) and fuel injector holder (9) and tighten fuel injector holder.
3.
Remove caps/plugs and install metallic tube (8) and tighten two nuts (7).
4.
Install loop clamp (12) to shouldered stud (6) and secure with lockwasher (5) and nut (4).
5.
Remove caps/plugs and install hose (3) to fuel injector holder (9) and secure with two hose clamps (1).
6.
Secure hose (3) with hose clamp (2).
FOLLOW-ON MAINTENANCE
Fill fuel tank with diesel fuel (para. 3-3).
4-489
