TM 9-2330-381-14
5-10.
UPPER SUSPENSION ARM BEARING (CONT)
Materials/Parts
Grease, item 12, appx. E
Bearing cone (upper suspension arm)
Crocus cloth, item 6, appx. E
Wiping rag, item 19, appx. E
Dry cleaning solvent, item 26, appx. E
Wood block, 4-inch x 4-inch x 12-inch lg
Personnel Required: 2
Equipment Condition
Suspension assembly removed (para. 4-40)
REMOVAL
CAUTION
The upper suspension bearing cone will be destroyed during removal. Pay close
attention to the following steps or serious damage to platform spindle may result.
Remove upper suspension bearing cone (1) from platform spindle (2) as follows:
a. Using a hammer and cold chisel, break bearing cage (3) at two points.
b. Once bearing cage (3) is broken, remove all bearing rollers (4).
c. Clean all grease from spindle and surrounding area with wiping rag.
5-10
