TM 9-2330-383-14&P
This task covers: a. Removal
c. Repair
b. Cleaning and Inspection
d. Installation
INITIAL SETUP
Tools
Personnel Required: 2
General mechanics tool kit
Equipment Condition
Electrical tool and connector repair kit
Right rear wheel removed
Materials/Parts
Lockwasher (12)
Lock nut (4)
REMOVAL
CAUTION
Be careful not to cut air hose when cutting tape from tiewraps.
NOTE
Remove complete harness only if required to effect repair or replace-
ment.
a. Cut tape and remove tiewraps around harness at composite light mounting
brackets.
b. Tag and disconnect harness connectors (1) at all lights by pulling connector
halves apart.