TM 9-2330-383-14&P
4-13. WIRING HARNESS (CONT)
c. Tag and disconnect harness connectors at front receptacle.
d. On old trailers with serial numbers 2000 and below, remove 12 nuts and
lockwashers from 10 screws and 2 studs securing the harness clamps at
positions along right side under frame. Remove clamps from wiring harness.
d.1. On new trailers with serial numbers 2001 and up, remove 26 nuts from 22 studs
and 4 screws securing harness clamps at positions along right side under
frame. Remove clamps from wiring harness.
e. Remove four lock nuts (1), capscrews (2), and washers (3) to free ground lead
(4), receptacle (5) and cover (6) from frame.
NOTE
To make installation easier, tape receptacle bundles to main harness if
desired.
f. To remove, feed wire harness through grommets and along frame.
Change 1
