TM 9-2330-384-14&P
4-35. BRAKE SHOE REPLACEMENT.
THIS TASK COVERS
Installation
a.
Removal
C.
b.
Inspection
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Ref Conditions
One return spring
l
Two shoe retainer springs
l
(Item 12, Appendix E)
Grease
l
Tools:
General Safety Instructions:
Tool kit, general mechanic's
l
Wipe clean excessive lubricant in the area
l
of brake shoe linings to avoid grease soak-
ing the linings.
a. REMOVAL
(1)
Turn adjusting nut on slack adjuster until S-cam (11) is in released position.
(2)
Press down on bottom brake shoe (10) and remove. roller (8) and retainer (9). Lift the top
brake shoe (2) and remove roller and retainer.
(3)
Remove return spring (4) and two return spring pins (3). Discard return spring.
(4)
While holding bottom brake shoe (10), remove two shoe retainer springs (1), and top and
bottom brake shoes (2 and 10). Discard shoe retainer springs.
4-101
