TM 9-2330-384-14&P
4-44. BRAKE INTERLOCK VALVES AND FITTINGS MAINTENANCE (Con't).
c. REMOVAL OF BRAKE INTERLOCK VALVE AND ANGLE BRACKET
NOTE
Brake interlock valve (4) and angle bracket (7) at front port (13) and rear
inlet (10) are removed the same.
Tag air lines for installation.
(1)
Disconnect air lines from brake interlock valve (4) (see paragraph 4-39).
(2)
Remove two locknuts (6), washers (5), and screws (2). Remove brake interlock valve (4)
from angle bracket (7). Remove two elbows (3) from brake interlock valve. Discard locknuts.
(3)
If damaged, remove two nuts (8), screws (11), and four washers (9). Remove angle bracket
(7).
4-135
