TM 9-2330-384-14&P
4-44. BRAKE INTERLOCK VALVES AND FITTINGS MAINTENANCE (Con't).
j . INSTALLATION OF SHUTTLE VALVE
WARNING
Ensure that air lines do not rub against each other or any other surface when
installed. Relocate or provide support, as required. If air lines rub, a leak
may develop, resulting in brake lockup and possible serious injury or death
to personnel.
NOTE
All male threads of fittings should be coated with antiseize tape if not al-
ready factory-coated with an antiseize compound.
Install two elbows (29) and
(1)
straight adapter (30) to shuttle
valve (26).
Install shuttle valve (26) to frame
(2)
(31) with screw (32), two wash-
ers (27), and new locknut (28).
Connect air lines to shuttle valve
(3)
Perform LEAKAGE TEST (sub-
(4)
paragraph b).
4-140