TM 9-2330-384-14&P
4-44. BRAKE INTERLOCK VALVES AND FITTINGS MAINTENANCE (Con't).
Install tee (15), tee (14), and elbow (25).
(4)
Install nipple (20) and inversion valve (21) to relay quick release valve (1).
(5)
Connect air lines to inversion valve (21), relay quick release valve (l), tee (14), and elbow
(6)
(25) (see paragraph 4-39).
(7) Perform LEAKAGE TEST (subparagraph b).
i.
REMOVAL OF SHUTTLE VALVE
NOTE
Tag air lines for installation.
Disconnect air lines from shuttle
(1)
valve (26) (see paragraph 4-39).
Remove locknut (28), screw
(2)
(32), and two washers (27). Re-
move shuttle valve (26) from
frame (31). Discard locknut.
Remove two elbows (29) and
(3)
straight adapter (30) from shuttle
valve (26).
4-139
