TM 9-2330-384-14&P
4-44. BRAKE INTERLOCK VALVES AND FITTINGS MAINTENANCE (Con't).
g. REMOVAL OF RELAY QUICK RELEASE VALVE
NOTE
Tag air lines for installation.
Disconnect air lines from inver-
(1)
sion valve (21), relay quick re-
lease valve (1), tee (14), and
elbow (25) (see paragraph 4-39).
Remove inversion valve (21) and
(2)
nipple (20) from relay quick re-
lease valve (1).
Remove tee (14), tee (15), and
(3)
elbow (25).
Remove nut (16) and starwasher
(4)
from terminal stud (18). Remove
relay quick release valve (1) and
terminal stud from support bar
(17).
Separate relay quick release
(5)
valve (1) from terminal stud (18).
Remove elbow (24) and plug (19)
(6)
from relay quick release valve
(1).
h. INSTALLATION OF RELAY QUICK RE-
LEASE VALVE
WARNING
Ensure that air lines do not rub
against each other or any other sur-
face when installed. Relocate or pro-
vide support, as required. If air lines
rub, a leak may develop, resulting in
brake lockup and possible serious in-
jury or death to personnel.
NOTE
All male threads of fittings should be
coated with antiseize tape if not al-
ready factory-coated with an antiseize
compound.
(1)
Install elbow (24) and plug (19) to relay quick release valve (1).
(2)
Install terminal stud (18) to relay quick release valve (1).
(3)
Install terminal stud (18) to support bar (17) with starwasher and nut (16).
4-138
