TM 9-2330-384-14&P
5-3. BRAKE SHOE REPAIR.
THIS TASK COVERS
Installation of Brake Shoe Linings
Removal of Brake Shoe Linings
a.
C.
Cleaning and Inspection
b.
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Forty-eight rivets
Ref
Conditions
l
Dry cleaning solvent (ltem 10, Appendix E)
l
General Safety Instructions:
Tools:
Dry cleaning solvent is flammable and must
l
Tool kit, general mechanic's
l
not be used near open flame. Use only in a
C-clamps
l
well-ventilated area.
Drill & No. 29 drill bit
l
Compressed air used for drying purposes
Rivet gun
l
must not exceed 30 psi (207 kPa).
a. REMOVAL OF BRAKE SHOE LININGS
(1)
Drill out 24 rivets (3) and remove
brake lining cam (2) and brake
lining anchor (1) from brake
shoe. Discard rivets.
(2) Repeat step 1 to remove brake
shoe linings from other brake
shoe.
5-7
