TM 9-2330-386-14&P
4-18 CLEARANCE L I G H T .
This task covers removal and installation.
INITIAL SETUP
Tools
General mechanics tool kit
WARNING
Disconnect all electrical power before performing any
maintenance on the electrical system. Failure to do so
could result in injury.
NOTE
This procedure is typical for all side clearance lights.
a. Removal.
(1) Pull wiring harness connector (1) from
clearance light (2).
(2) Push clearance light (2) from
grommet (3).
(3) Remove grommet (3) from frame (4).
b.Installation.
(1) Install grommet (3) in frame (4).
(2) Snap clearance light (2) into position
in grommet (3).
(3) Connect wiring harness connector (1)
to clearance light (2).
(4) Connect electrical power and test for
proper operation.
TASK END HERE
4-26
