TM 9-2330-386-14&P
4-19 BAR LIGHT.
This task covers:
a. Removal
c. Repair
b . Disassembly
d. Reassembly
e. Installation
INITIAL SETUP
Tools
General mechanics tool kit
WARNING
Disconnect all electrical power before performing any
maintenance on the electrical system. Failure to do so
could result in injury.
a.Removal
(1) Remove two screws (1) and bracket (2).
(2) Pull three wiring harness connectors (3) from clearance lights (5).
b.Disassembly.
(1) Using flat-tip screwdriver, pry tab (4) from side of clearance light (5)
just enough to remove clearance light (5) from bracket (2).
(2) Repeat step (1) for two remaining clearance lights (5).
4-27