TM 9-2330-386-14&P
5-10 SPRINGS (CONT) .
(12) Install clamp plate (3) , four washers (2), and nuts (1).
Torque nuts to
880 lb-ft.
( 1 3 ) Remove axle and frame supports.
TASK ENDS HERE
5-11 TRUNNION TUBE.
This task covers removal and installation.
INITIAL SETUP
Tools
Personnel Required: (2)
Equipment C o n d i t i o n
Floor jacks
References
J a c k stands
General mechanics tool kit
L a n d i n g legs down.
S h o p equip auto repair, FM basic
T i r e s and wheels removed.
Para. 4-27 A l l hoses removed from
air brake chambers.
a. R e m o v a l .
WARNING
The frame and axles must be firmly supported to prevent
s h i f t i n g o f t h e s e m i t r a i l e r . S h i f t i n g may cause serious
injury to personnel and damage to equipment.
(1) Raise and support both sides of
semitrailer frame.
(2)
Place floor jacks into
position
support both axles.
( 3 ) Remove four nuts (1), washers (
and clamp plate (3).
(4) Repeat step (3) at opposite aid
of semitrailer.
5-17
