TM 9-2350-222-10-2
OPERATE MOLDBOARD (PERFORM MOLDBOARD OPERATIONS) - Continued
To Float Moldboard:
Make Sure:
NOTE
When BULLDOZER CONTROL VALVE lever (B)
is in FLOAT position, moldboard rides on
ground with its own weight for downward
pressure. FLOAT position is useful for moving
loose material on hard surfaces. Do not use
FLOAT on very soft or loose ground. The
moldboard will dig in and collect more material
than vehicle can push without stalling. When
TA132400
BULLDOZER CONTROL VALVE lever (B) is set
to FLOAT, it will stay in FLOAT until moved.
1.
Move and hold BULLDOZER CONTROL VALVE lever (B) to
LOWER position. When moldboard touches ground, move
BULLDOZER CONTROL VALVE LEVER (B) to FLOAT position
and release.
2-260