TM 9-2350-222-10-2
OPERATE MOLDBOARD (PERFORM MOLDBOARD OPERATIONS) - Continued
To Hold Moldboard:
Make Sure:
You have read WARNING and CAUTION (page 2-256).
Hydraulic system has been started (page 2-249).
Moldboard is prepared for operations (page 2-253).
NOTE
When BULLDOZER CONTROL VALVE lever (B)
is in HOLD position, moldboard is held rigidly in
place. BULLDOZER CONTROL VALVE lever (B)
is spring loaded to return to HOLD position
when released from either RAISE or LOWER
position. BULLDOZER CONTROL VALVE lever
must be moved manually from FLOAT position
to HOLD position.
1.
To go to HOLD position from RAISE or LOWER, release
BULLDOZER CONTROL VALVE lever (B). Lever will move to
HOLD position.
TA132399
2.
To go to HOLD position from FLOAT, move BULLDOZER
CONTROL VALVE lever (B) to HOLD position and release.
2-259
