TM 9-2350-222-10-2
OPERATE WINCH (PERFORM DIRECT WINCHING) - Continued
CAUTION
Winch gear shift lever (E) must be locked in LO
position before operating winch (F).
NOTE
If shifting is difficult, do not force lever (E).
Slightly turn winch (F) until gear shift lever (E)
moves into position.
3. Pull back and hold shift lever handle (G).
4. Move shift lever (E) to LO.
5. Release shift lever handle (G).
WARNING
Keep all personnel clear of winch and cable
during operation. All personnel must be at least
the length of cable away from vehicle and load.
Serious
injury
could
result
if
winch
malfunctions or cable breaks.
TA132414
2-274
