TM 9-2350-222-10-2
OPERATE WINCH (PERFORM DIRECT WINCHING)
To Perform Single Line Direct Pull Winching:
WARNING
Driver's hatch must be kept closed during
winching operations. If cable should break with
hatch open, driver could be injured or killed.
NOTE
Operating
the
winch
requires
three
crewmembers: Commander, Driver, and outside
Crewmember.
Make Sure:
Vehicle is prepared for winching (page 2-269).
Driver's hatch is closed (page 2-166).
1.
Move WINCH CONTROL lever (A) down to pay out enough
cable (B) to reach load (C).
2. Connect lifting hook (D) to load (C).
CAUTION
Pulling capacity with a single line is 25,000
pounds on the bare winch cable drum.
TA132413
2-273
