TM 9-2350-222-10-3
TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
42. MOLDBOARD FAILS TO RAISE HIGH ENOUGH TO ENGAGE CARRYING
HOOKS - Continued
WARNING
Before leaving vehicle to check linkage, be sure that engine is
off. Accidental vehicle movement may cause injury
Check linkage (A) at front of vehicle and at base of hydraulic
Step 3.
cylinders (B) for dirt, stones and obstructions between parts. Also
check for distortion of linkage.
a.
Remove any obstacle found.
If linkage is distorted,
b.
or problem still exists, notify
organizational maintenance.
NOTE
If required to continue operation, use Emergency Moldboard
Lifting Procedure (page 2-263).
TA132881
3-51