TM 9-2350-222-10-3
TROUBLESHOOTING
-
Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
39. BULLDOZER MOLDBOARD WILL NOT LOWER FROM LOCK "TRAVEL"
POSITION - Continued
Check linkage (E) at front of vehicle for dirt and stones between
Step 3.
parts. Also check for distortion of linkage.
a.
Remove any obstacle found.
b.
If linkage(E) is distorted, or problem still exists, notify
organizational maintenance.
40. BULLDOZER MOLDBOARD DOES NOT LIFT
Step 1. Check to see if selector valve lever(A) is in HULL position.
If not in HULL position (B), place in HULL position.
TA132877
