TM 9-2350-222-10-3
TROUBLESHOOTING - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
MOLDBOARD
39. BULLDOZER MOLDBOARD WILL NOT LOWER FROM LOCK "TRAVEL"
POSITION
Step 1. Check red buttons(A) on hydraulic oil filters (B).
If red buttons(A) are up, press down. If buttons will not stay down,
notify organizational maintenance.
Step 2. Check oil level on dipstick (C) from hydraulic oil reservoir (D).
Add oil if necessary (LO 9-2350-222-12).
WARNING
Before leaving vehicle to check moldboard, be sure that en-
gine is off. Accidental vehicle movement may cause injury.
TA132876
