TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE END CONNECTORS) - Continued
NOTE
It may be necessary to hit seated end connec-
tor (M) with hammer to loosen.
12. Tighten puller screws (T) evenly or pump handle on hydraulic
end connector pump and puller until end connector (M)
pulls free of track pins (U).
13. Remove end connector puller (K) or hydraulic end connector
pump and puller from end connector (M).
NOTE
To remove inner end connector, repeat steps 1
thru 13.
14.
Return end connector puller (K) or hydraulic end connector
pump and puller to right rear fender box.
15.
If no further maintenance is required, install new end connector
TA132898
3-68
