TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE CENTERGUIDE)
Tools:
Get tools from right front fender box.
q 1-5/16 inch socket, with 3/4 inch
drive (A).
q 4-5/8 inch socket wrench
extension with 3/4 inch
drive (B).
q T-handle socket wrench with 3/4
inch drive (C).
q 2 pound hammer (D).
q Extension handle (E).
Make Sure:
q Vehicle is stopped on hard
level surface.
q Centerguide (F) is positioned
between compensating idler (G)
and number one roadwheel (H).
q Engine is not running,
1. Place 1-5/16 inch socket (A), socket
wrench 4-5/8 inch extension (B), T-
handle socket wrench (C), and
extension handle (E) on centerguide
nut (J).
2. Turn counterclockwise to loosen nut
(J) until it is flush with bolt (K).
TA132899