TM 9-2350-222-10-3
MAINTAIN TRACK (ADJUST TRACK TENSION -
MECHANICAL) - Continued
8.
Find center of string (F) and mark ( ) nearest end connector (G).
NOTE
If space between string and end connector mess-
ures between 7/16 inch (11.1 mm) and 1/2 inch
(12.7 mm), track tension is good. If it does not, do
steps 10 through 18.
9.
Using ruler (H), measure distance between
string (F) and marked (
) end connector (G).
TA249236
Change 2
3-86