TM 9-2350-222-10-3
MAINTAIN TRACK (ADJUST TRACK TENSION -
GREASE ACTUATED ADJUSTING LINK)
Tools:
Get spanner wrench (A) from
left front fender box.
Get from tool bag:
Grease gun (B)
Lubrication extension (C)
Flat tip screwdriver (D)
5/8 in x 3/4 in wrench (E)
NOTE
Track tension adjustment must be performed after all
inspection faults have been corrected.
Do not use any other method to check track tension
w h e n grease actuated track adjusting link is
installed.
1.
Move tank forward on hard, level surface and coast to a stop
without applying brakes.
2.
Remove/clean grease, mud, and dirt from pressure relief valve (F).
grease fitting (G), threaded locking collar (J),
and locking screw (K).
TA249240
Change 2
