TM 9-2350-222-10-3
MAINTAIN TRACK (REMOVE AND INSTALL T-142 TRACK PAD) - Continued
2. Using 1-1/8 inch socket (A),
T-handle wrench (B), and
extension handle (D), loosen
nut (H) by turning
counterclockwise.
3. Remove nut (H).
4. Hit bolt (J) with hammer to
remove pad (E) from link
assembly (K).
To Install:
1. Place new pad (E) on link
assembly (K).
2. Screw nut (H) on bolt (J).
3. Using socket (A), T-handle
wrench (B), and extension
(D), tighten nut (H).
NOTE
Have organizational maintenance
torque nut as soon as possible.
4. Return tools to stowage.
TA132914