TM 9-2350-222-10-3
MAINTAIN PERISCOPES (REMOVE PERISCOPE BODY)
To Remove M32CE1 Passive Body:
Make Sure:
q MASTER BATTERY switch (A) is
set to OFF.
q ELEV/TRAV POWER switch (B) is
set to OFF.
1. Disconnect light source (C) (if
connected):
a. Remove cable (D) from
connector (E).
b. Connect cable (D) to light
source (C).
2. Raise headrests (F) and (G).
3.
Hold passive body (H) with
one hand.
4.
Release front latch (J).
5.
Release rear latch (K) behind
periscope.
6.
Lower passive body (H) until it
clears the head assembly (L).
TA252975
Change 1 3-210.1
