TM
9-2350-222-10-3
MAINTAIN PERISCOPES (REMOVE PERISCOPE BODY) Continued
To Remove M36E1 Passive and Daylight Body:
Make Sure:
q MASTER BATTERY switch (A) is
set to OFF.
q Cupola azimuth lock is locked
(page 2-569).
1. Riase headrests (B) and (C).
NOTE
Gently lower elevation arm assembly.
2. Disconnect quick disconnect clamp
(D) from elevation arm assembly (E)
and lower clamp.
3. Disconnect electrical connector (F)
from cupola.
4. Disconnect lamp housing (G) from
daylight body (H) and secure to light
control (J).
TA252977
Change 1 3-210.3
